Skip to content
by UPKnife

UPK-T1 Rocket Tool (Cast)

Sale
$14.95 $20.00

Rocket Tool

This is the ultimate pocket Phillips screwdriver and Pry Bar combo made in Hardened Tool Stainless Steel. This tool is meant to lie in the bottom of your pocket, ready when you need it.

It's a serious time saver to have on-hand! 

Built Tough for Every Day use.

Features:

  • Integrated PH#2 Phillips driver tip
  • 1/4" Hex box end wrench bit holder
    • O-ring bit retention
  • 1/4" Hex center position "T-Handle" position
  • 8mm flat tip pry edge with center split groove
  • Dual claw pry arms
    • functions as Right or Left handed can opener
  • 4mm Hex driver
  • Storage for:
    • 2x - 1/4" Hex bits 25mm(short)
    • 1x - 1/4" Hex bit 50mm
  • Finish: BrightMetal
    • a scratch resilient surface produced by tumble polishing then micro ball peening to create an even sheen that further improves performance creating surface compression that reduces stress fractures.
  • Made in Cast 154CM Stainless Steel and Heat Treated to HRC 56-58
    • Often referred to as "Blade Steel" or "Tool Steel" because of its significant hardness and use in blades and manufacturer tooling.

INCLUDES:

  • 1x UPK-T1 Rocket Tool
  • 1set light O-Rings(6pcs+2xtra)

 The Details

  • The integrated Philips #2 is the most frequently used tool tip, granting access to a cover/panel or changing the batteries.
  • The internal storage slot will fit either: 2 pcs of 1"(25mm) ¼” hex bits, or 1pc of extended 2"(50mm) hex bit. This is great to store those bits that are unique to your needs.
  • The 6 O-rings are carefully placed to capture the bits in storage and offering bit retention when wrenching.  The O-rings also provide a round screwdriver handle and grip feel, like a classic screwdriver. 
  • The pronged pry stud extensions "wings" offer lifting for anything from bottle tops, paint can lids, to even those stubborn acetone/alcohol plastic top caps.  In addition, they offer additional finger leverage to torque screws tight or loose in screw driver mode.
  • The Rocket Tool is made with a hardened 154CM stainless blade steel, and actually made for pry tasks without any significant wear.  This means hard tasks like working a nail out of a hard wood won’t causing irreversible damage to the tool.  The T1 is made to out last its user with practically no maintenance, though you might need to wipe off softer materials from its pry surface from time to time. 
  • At the tapered end is an 8mm x 1mm flat end for torquing screws, general prying, with the addition of a split tip groove to accommodate prying nails or binding an awkward pry job.  This tool was made to pry.

Dash Dispatch

All orders placed before 1pm PST Monday to Friday are typically dispatched same day.

In-Stock orders ship within 1 business day

Back-order items ship in 6 weeks and usually under. Please contact if you have delivery circumtances.

Learn more

Satisfaction Guarantee!

You have 30 days from receiving your order to return or exchange it FREE OF CHARGE.

Learn more