UPK-M2 Lite
UPK-M2 Lite
Made in the strongest Aluminum Alloy practical to make a handle from, the 7075-T6 Aluminum boasts a tensile stregnth of 74 ksi which is well into steel strength territory. The hardcoat anodize is a military specification thickness of anodize that provides a high strength skin of Aluminum oxide to improve durability and scratch resistance over standard anodize aluminum parts.
Available in Black, Navy Blue and Dark OD Green, the handles offer a stark contrast to the Blades micro peened surface.
Features:
- 3 Position Bolt Action OTF Operation
- 3.1” Sandvik 14C28N Stainless Heat treated Blade
- Multi-Purpose Saw
- Bottle Opener
- Box Wrench Sizes: 9 SAE/Metric
- Dual: 9/16"(15mm), 1/2"(13mm), 3/8"(10mm)
- Solo: 7/16", (12mm), 1/4"
- 1/4" Bit Driver Driver (T-Handle) with NdFeB magnet retention
- Wire Stripper fixed V-blade
- Tungsten Carbide Glass Breaker Tip with Center-Punch Action
- Deep Carry Concealed Pocket clip
- holds up to a 1.5" Belt Width
- Integrated Lanyard Loop
What is it made out of?
Blade steel: Sandvik 14C28N Stainless Steel Heat treated target HRC: 62
Handle Material: 7075-T6 Aluminum with Hardcoat Anodize
Bolt Lever material: 450 Stainless steel Heat treated to HRC: 45
Hardware material: 316 Stainless screws, 302 Stainless Springs and Pocket Clip, 304 Stainless Dowels, 440C Stainless Steel Ball Bearing, 304 Stainless carrier for a *Tungsten Carbide glass breaker tip, *Neodymium Magnet
Specifications:
Knife pattern: Hybrid Tanto Custom Multi-tool Blade Pattern
Blade length: 3.1inch
Blade grind and micro bevel: Flat Sabre Grind, wet ground and sharpened to preserve the temper all the way to the edge
Dimensions:
Length Closed: 4.3" (110mm)
Partial Open Length: 5.1" (130mm)
Full Open Length: 7.2" (184)
Width: 1 3/8" (35mm)
Thickness Handle: 5/16" (8mm)
Thickness Overall: 9/16" (14.2mm) clip to bolt lever
Weight: 2.6 oz.
Where is it made?
USA Made Qualified Claim: Designed, Engineered, Prototyped, Tested, Ground, Finished, Sharpened, Laser Engraved, Assembled, and packaged in-house in Agua Dulce, CA, USA with imported and US sourced materials and hardware.
I love the design and closing mechanism of this knife/tool. I use it mainly as a cutting tool. Only having to open it to it's quarter slot is convenient when I need to just cut a box open. I've been edc-ing it for a couple weeks now and there have been a couple build issues that have cropped up. The paint/finish on the aluminum handle has been "rolling up" where the bottom bolt sits which can at times cause my thumb to catch on it. The paint elsewhere also has some scuffs on it from just daily use it appears. The pocket clip has also become quite loose which should be easy enough to fix but I'm guessing this will need to be tightened from time to time. The tool otherwise has been great and feels very good in the hand. Thanks for making this unique tool!
It great
Impressive amount of functionality in a slim configuration that fits comfortably in a front pants pocket.
Thank you so much for your support
-John Risch UPKnife
I like the UPK-M2, Fun tool to have in my pocket. I have the Titanium UPK-M2 and it is nice to carry around the lighter version. Thank you, Pat
I could not be happier with the quality and utility of the upk-m2! And as a machinist, the craftsmanship is remarkable 👌